Fortunately, there is a file system (actually two, I'll explain) that you can format your flash drive to be fully compatible with Mac and PC. In other words, you can access the drive and transfer data without any hassles. That file system is — exFAT. The procedure will be as follows: Run the command prompt as administrator (see How to start the command prompt as administrator) and enter the command (an. Format d: / fs: fat32 / q (In this command, after fs: you can specify NTFS to format not in FAT32, but in NTFS.
Formatting a USB flash drive from the command line is actually a bit simpler in Linux than using a GUI tool. First, you need to find your flash drive. This can be done in a couple of different ways.
The fdisk utility will give you a good idea of which drives are attached to your Linux system. The output of this command will look something like this:
In this case, the USB flash drive is /dev/sdb. The primary partition is /dev/sdb1, with a boot flag.
Reformat Flash Drive Mac
Again, with this command, the USB drive appears at the end. The flash drive is on /dev/sdb with a primary partition of /dev/sdb1, and is mounted on /mnt/myusb.
Now that you know what designation your USB flash drive has, you can format it. First, unmount the drive.
Apowersoft free screen recorder 64 bit windows 7. Now, format the drive.
An easy way to remember this command is that 'mkfs' stands for 'make file system'. Lenovo T61 Mini Card Driver Win7 - sokolgreen. VFAT, in this case, refers to the file system type.
You can use different file system types if necessary. For example:
EXT file systems are typically used for Linux installations or files, whereas NTFS (New Technology File System) is a Windows-based file system.
Format Flash Drive Mac Command Line Command
You can now remount your USB drive and use it to store data or as a bootable drive.
Additional Reading
Format Flash Drive Mac Fat32
Restore the MBR to a USB Flash Drive in Linux
How to Create a Bootable Linux Flash Drive on Windows